1.5 hp Horizontal Centrifugal Pump, Single Stage

$1,184.13
Factory price horizontal centrifugal pump with motor power 1.5 hp, 3 phase, centrifugal water pump has the same diameter of inlet and outlet 25mm (1 inch). High pressure centrifugal pump has input voltage AC 220V to 480V for selection. Small centrifugal pump can be used for garden sprinkler irrigation, HVAC & refrigeration water circulation, etc.
SKU: ATO-HCP-1100W
*
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 6-12 days

Cost-effective centrifugal water pump with minimum flow 2.9 m³/ h, maximum flow 4.9 m³/ h (21.6 gpm), minimun head 26m (85ft) and maximum head 29m (95ft).

Features:

  1. The centrifugal pump has the horizontal structure. The diameter of the inlet and outlet are the same. If a protective cover is added, it can be used in the open air.
  2. It is easy to install and maintain. No need to dismantle pipeline system, just lifting off the conjunction flat nut of vertical pump. Then all the rotor parts can be taken out.
  3. Horizontal centrifugal pump can be operating in series and parallel connection according to the requirements of flow and head.
  4. The installation angle of pump outlet can be 0°, 90° and 180° to meet different connection occasions.

Specification

  • Model: ATO-HCP-25-160A
  • Power: 1.5 hp
  • Number of stages: Single stage
  • Input voltage: AC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
  • Input frequency: 50Hz/ 60Hz
  • Inlet diameter: 25mm (1 inch)
  • Outlet diameter: 25mm (1 inch)
  • Flow (min. flow to max. flow): 2.9 m³/ h (12.8gpm), 3.7 m³/ h (16.3gpm), 4.9 m³/ h (21.6gpm)
  • Head (max. head to min. head): 29m (95ft), 28m (92ft), 26m (85ft)
  • Efficiency: 27%, 31%, 29%
  • Nominal diameter of impeller: 160mm
  • Size: 355*420*200mm
  • Weight: 65kg

Dimension (mm)

Boundary dimensionhHLaA
2103554208055
Base dimensionL1BIbh14-φd1
320200270100804-φ14
Flange dimensionDD1n-φd
φ115φ854-φ14

Horizontal centrifugal pump dimension

Tips: Classification of Centrifugal Pump.

1. Classify by the number of the working impellers

  1. Single-stage pump: there is only one impeller on the pump shaft
  2. Multiple-stage pump: there are two or more than two impellers on the pump shaft. Then, the total head of the pump is the sum of the head of the n impellers.

2. Classify according to the working pressure

  1. Low-voltage pump: pressure below 10000mmH2O.
  2. Middle-voltage pump: pressure within 10000~65000mmH2O.
  3. High-voltage pump: pressure higher than 65000mmH2O.

3. Classify according to the impeller's water feeding means

  1. One-sided water feeding pump: namely, the single end suction centrifugal pump, the impeller has only one water inlet.
  2. Two-sided water feeding pump: namely, the double suction centrifugal pump, the impeller has one water inlet on each side. Its flow doubles that of the single-suction pump. It can be approximately regarded that two single end suction impellers are placed back to back.

4. Classify according to the pump shaft position

  1. Horizontal centrifugal pump: the pump shaft is in the horizontal position.
  2. Vertical centrifugal pump: the pump shaft is in the vertical position.

5. Classify according to the means of leading the water out of the impeller to the delivery chamber

  1. Volute shell pump: the water directly goes into the pump shell with the spiral line shape after coming out of the impeller.
  2. Guide vane pump: the water enters the externally set guide vane after coming out of the impeller, and then enters the next stage or flows into the outlet.

6. Classify according to the application

According to the application, it is can be divided into sewage centrifugal pump, hot water centrifugal pump, anti-corrosion chemical centrifugal pump, anti-explosion centrifugal oil pump and so on.

Phase3 phase
Input voltageAC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
Input frequency50Hz, 60Hz
Installation angle of outlet0°, 90° and 180°
Pump typeBooster pump
Number of stagesSingle stage
Motor typeY/ Y2 series motor
Motor speed2900rpm
Impeller material304/ 316 stainless steel
Seal material304 stainless steel, tungsten carbide, fluorine rubber
Inlet max. pressure1MPa (145 psi)
(NPSH)r2.3m
UsageWater, or liquids compatible with pump component materials.
1. The volume of solid particles should be less than 0.1% in unit volume, and the granularity should be less than 0.2mm.
2. The temperature should be lower than 60℃.
EnvironmentTemperature: <40℃, humidity: <95%, altitude<1000m
Warranty12 months

Different types of centrifugal pumps

This video explains different types of centrifugal pumps that can be selected according to one's own needs.

Principles and functionality explained

This video tells us what a centrifugal pump is and its working principle, and you will have a general understanding of it.

Components of centrifugal pumps

This video is an explanation of the components of a centrifugal pump, and we can learn the basic knowledge of the eight components of a centrifugal pump from it.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
This pump worked perfectly.
5
Wordsworth
Avatar
5/6/2022 8:39 PM
This horizontal centrifugal pump is easy to install as a replacement for my 6 year old different brand. Super happy with this change. Worked perfectly right out of the box. I would recommend it.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Cost-effective centrifugal water pump with minimum flow 2.9 m³/ h, maximum flow 4.9 m³/ h (21.6 gpm), minimun head 26m (85ft) and maximum head 29m (95ft).

Features:

  1. The centrifugal pump has the horizontal structure. The diameter of the inlet and outlet are the same. If a protective cover is added, it can be used in the open air.
  2. It is easy to install and maintain. No need to dismantle pipeline system, just lifting off the conjunction flat nut of vertical pump. Then all the rotor parts can be taken out.
  3. Horizontal centrifugal pump can be operating in series and parallel connection according to the requirements of flow and head.
  4. The installation angle of pump outlet can be 0°, 90° and 180° to meet different connection occasions.

Specification

  • Model: ATO-HCP-25-160A
  • Power: 1.5 hp
  • Number of stages: Single stage
  • Input voltage: AC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
  • Input frequency: 50Hz/ 60Hz
  • Inlet diameter: 25mm (1 inch)
  • Outlet diameter: 25mm (1 inch)
  • Flow (min. flow to max. flow): 2.9 m³/ h (12.8gpm), 3.7 m³/ h (16.3gpm), 4.9 m³/ h (21.6gpm)
  • Head (max. head to min. head): 29m (95ft), 28m (92ft), 26m (85ft)
  • Efficiency: 27%, 31%, 29%
  • Nominal diameter of impeller: 160mm
  • Size: 355*420*200mm
  • Weight: 65kg

Dimension (mm)

Boundary dimensionhHLaA
2103554208055
Base dimensionL1BIbh14-φd1
320200270100804-φ14
Flange dimensionDD1n-φd
φ115φ854-φ14

Horizontal centrifugal pump dimension

Tips: Classification of Centrifugal Pump.

1. Classify by the number of the working impellers

  1. Single-stage pump: there is only one impeller on the pump shaft
  2. Multiple-stage pump: there are two or more than two impellers on the pump shaft. Then, the total head of the pump is the sum of the head of the n impellers.

2. Classify according to the working pressure

  1. Low-voltage pump: pressure below 10000mmH2O.
  2. Middle-voltage pump: pressure within 10000~65000mmH2O.
  3. High-voltage pump: pressure higher than 65000mmH2O.

3. Classify according to the impeller's water feeding means

  1. One-sided water feeding pump: namely, the single end suction centrifugal pump, the impeller has only one water inlet.
  2. Two-sided water feeding pump: namely, the double suction centrifugal pump, the impeller has one water inlet on each side. Its flow doubles that of the single-suction pump. It can be approximately regarded that two single end suction impellers are placed back to back.

4. Classify according to the pump shaft position

  1. Horizontal centrifugal pump: the pump shaft is in the horizontal position.
  2. Vertical centrifugal pump: the pump shaft is in the vertical position.

5. Classify according to the means of leading the water out of the impeller to the delivery chamber

  1. Volute shell pump: the water directly goes into the pump shell with the spiral line shape after coming out of the impeller.
  2. Guide vane pump: the water enters the externally set guide vane after coming out of the impeller, and then enters the next stage or flows into the outlet.

6. Classify according to the application

According to the application, it is can be divided into sewage centrifugal pump, hot water centrifugal pump, anti-corrosion chemical centrifugal pump, anti-explosion centrifugal oil pump and so on.

Product reviews
This pump worked perfectly.
5
Wordsworth
Avatar
5/6/2022 8:39 PM
This horizontal centrifugal pump is easy to install as a replacement for my 6 year old different brand. Super happy with this change. Worked perfectly right out of the box. I would recommend it.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews