1.2 kW Hydraulic Electric Pump, 10000 psi

$568.85
220 Volt hydraulic electric pump for dump truck, power supply 1200 watt, high pressure flow rate 1.7 L/min, low pressure flow rate 5 L/min, high pressure 10000 psi, maximum tank capacity is 2 L, hydraulic electric pump has the advantages of small size, light weight and simple structure.
SKU: ATO-HEP-QQ700
Free Shipping
Delivery date: 10-12 days

10000 psi hydraulic electric pump is driven by 1.2 kW electric motor, widely used with punch machine, cutting machine, bending machine, cylinder, pipe benders, hole digger, cable cutter, crimping tool, etc.

Specification

Model: ATO-HEP-QQ700

High Pressure: 10,000 psi (70 Mpa)

High Pressure Flow Rate: 1.7 L/min

Motor Power: 1.2 kW

Voltage: 220V

Frequency: 50Hz / 60Hz

Speed: 3700 rpm

Oil Storage Capacity: 2 L

Weight: 11 kg

1200W Hydraulic Electric Pump Structure Diagram

Structure of 1200w electric hydraulic pump

1200W Hydraulic Electric Pump Dimension Drawing (Unit: mm)

1200w electric hydraulic pump dimension

Tips: Hydraulic electric pump for disassembly and assembly precautions

  1. When disassembling the hydraulic electric pump, it is necessary to release the pressure in the circuit, otherwise the oil will be ejected rapidly.
  2. When disassembling, prevent damage to the piston rod top wire, oil hole threads, piston rod surface and cylinder sleeve inner wall.
  3. After disassembly, all parts should be covered with plastic sheeting for safekeeping and stored in a dry environment.
  4. Due to the composition of each hydraulic pressure ring and pressure ring, when the pressure cylinder structure and pressure ring size are not the same, the disassembly order is slightly different, generally speaking, the cylinder head and piston rod should be disassembled.
  5. Before and after unloading, prevent the components of the hydraulic electric pump from being contaminated by surrounding dust and impurities.
  6. Before carrying out assembly, clean each part carefully before assembling.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Low cost electric pump
5
Temir
Avatar
3/24/2025 7:11 PM
Hello, I need a low cost electric pump, any recommendations?
Was this review helpful? Yes No (0/0)
ATO Responded
Please tell us what type of water pump you want, and tell us what the parameters such as working voltage, flow rate, head, input/output interface, etc. are.
High quality hydraulic electric pump
5
Bob
Avatar
4/2/2026 7:34 PM
This pump runs powerfully and steadily. 10000 psi is stable, dual-flow efficient, compact and lightweight. Perfect with my hydraulic tools, very reliable for daily work.
Was this review helpful? Yes No (0/0)
More Information
5
Rhodes
Avatar
8/21/2026 3:08 AM
I would like to know more about hydraulic electric pumps.
1. What are the types of pump and motor in the (ATO-HEP-QQ700) model?
2. What are the types of pump and motor in the (ATO-HEP-D2) model? Can you provide a model without valves?
Was this review helpful? Yes No (0/0)
ATO Responded
1. This is the ATO-HEP-QQ700 hydraulic pump station, which includes a hydraulic pump and oil tank.
2. For the ATO-HEP-D2, the pump and motor type is a three-phase asynchronous motor. It cannot be used normally without valves; it is essentially a simplified hydraulic station system.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

10000 psi hydraulic electric pump is driven by 1.2 kW electric motor, widely used with punch machine, cutting machine, bending machine, cylinder, pipe benders, hole digger, cable cutter, crimping tool, etc.

Specification

Model: ATO-HEP-QQ700

High Pressure: 10,000 psi (70 Mpa)

High Pressure Flow Rate: 1.7 L/min

Motor Power: 1.2 kW

Voltage: 220V

Frequency: 50Hz / 60Hz

Speed: 3700 rpm

Oil Storage Capacity: 2 L

Weight: 11 kg

1200W Hydraulic Electric Pump Structure Diagram

Structure of 1200w electric hydraulic pump

1200W Hydraulic Electric Pump Dimension Drawing (Unit: mm)

1200w electric hydraulic pump dimension

Tips: Hydraulic electric pump for disassembly and assembly precautions

  1. When disassembling the hydraulic electric pump, it is necessary to release the pressure in the circuit, otherwise the oil will be ejected rapidly.
  2. When disassembling, prevent damage to the piston rod top wire, oil hole threads, piston rod surface and cylinder sleeve inner wall.
  3. After disassembly, all parts should be covered with plastic sheeting for safekeeping and stored in a dry environment.
  4. Due to the composition of each hydraulic pressure ring and pressure ring, when the pressure cylinder structure and pressure ring size are not the same, the disassembly order is slightly different, generally speaking, the cylinder head and piston rod should be disassembled.
  5. Before and after unloading, prevent the components of the hydraulic electric pump from being contaminated by surrounding dust and impurities.
  6. Before carrying out assembly, clean each part carefully before assembling.
Product reviews
Low cost electric pump
5
Temir
Avatar
3/24/2025 7:11 PM
Hello, I need a low cost electric pump, any recommendations?
Was this review helpful? Yes No (0/0)
ATO Responded
Please tell us what type of water pump you want, and tell us what the parameters such as working voltage, flow rate, head, input/output interface, etc. are.
High quality hydraulic electric pump
5
Bob
Avatar
4/2/2026 7:34 PM
This pump runs powerfully and steadily. 10000 psi is stable, dual-flow efficient, compact and lightweight. Perfect with my hydraulic tools, very reliable for daily work.
Was this review helpful? Yes No (0/0)
More Information
5
Rhodes
Avatar
8/21/2026 3:08 AM
I would like to know more about hydraulic electric pumps.
1. What are the types of pump and motor in the (ATO-HEP-QQ700) model?
2. What are the types of pump and motor in the (ATO-HEP-D2) model? Can you provide a model without valves?
Was this review helpful? Yes No (0/0)
ATO Responded
1. This is the ATO-HEP-QQ700 hydraulic pump station, which includes a hydraulic pump and oil tank.
2. For the ATO-HEP-D2, the pump and motor type is a three-phase asynchronous motor. It cannot be used normally without valves; it is essentially a simplified hydraulic station system.
Only registered users can write reviews