1.2 kW AC Servo Motor, 4 Nm/12 Nm, 3000 rpm

$569.17
Brushless AC servo motor with power rating of 1.2 kW, 4 Nm hold torque, 12 Nm peak torque, 5 amps, rated speed of 3000 rpm, high precise speed control.
SKU: ATO-SERVO-110S1200AC
*
*
*
*
Free Shipping
Delivery date: 6-12 days

1200W AC servo motor brushless design, rated torque of 4 Nm, maximum output torque of 12 Nm, 3000 rpm, three phase 220V AC supply voltage, equipped with a 2,500 PPR incremental/ absolute encoder.

Specification

BasicsModelATO110ST-M04030
Matched Drive ModelATOMG-1000 (Click it to the product page)
Square Flange Size110 mm
Rated Power1200 W
Rated Voltagethree phase 220V AC
Rated Current5 A
Rated Speed3000 rpm
Rated Torque4 Nm
Peak Torque12 Nm
Weight6 Kg
Length189 mm
Technical ParametersVoltage Constant54 V/ 1000r/ min
Torque Coefficient0.8 N.m/ A
Torque Inertia0.54 x 10-3 Kg.M2
Line-Line Resistance1.09 Ω
Line-Line Inductance3.3 mH
Electrical Time-Constant3 ms
Encoder Line Number2500 PPR
Absolute Encoder17 bit, 23 bit (Tamagawa brand)
Insulation ClassClass B
Safety ClassIP65
EnvironmentTemperature-20℃ ~ +40℃
Humidity<90%RH, (no dewing)

Dimension (unit: mm)

110mm ac servo motor size

L (without brake): 189mm, L (with brake): 245mm

Details

1200W AC Servo Motor Details

Winding and Encoder Connection

1. For servo motor winding

Motor Winding PlugWinding LeadUVWPE
Socket Number2341

2. For incremental encoder

Incremental Encoder Socket (15 Pin)Signal Definition5V0VBZ-UZU-AVWV-A-B-W-PE
Socket Number234567891011121314151

3. For absolute encoder

Absolute Encoder Socket (7 Pin)Signal DefinitionE-E+SD-0VSD+5VPE
Socket Number2345671

This video briefly shows the application of the ATO servo system in a linear slide.

ATO servo motor has 40mm to 180mm different square flange size, power rating from 50W to 7.5kW and speed range from 1000 rpm to 3000 rpm. so you can select the best one for your applications. In this video, ATO will show you servo motor linear actuator system for robotics.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

How to unlock the servo drive timing lock?

In this video, the process of unlocking the servo drive timing lock is demonstrated.

How to Connect the Servo Motor Controller and Set the JOG Mode?

The video shows the basic connection of the ATO servo motor kit and how to initialize the servo drive and how to set the JOG mode.

How to Use the Position Control Method of the Servo Motor(through PLC Pulse Control)?

The video introduces the connection and control (position control method) between PLC and ATO servo motor system.

Product reviews
How to control 1.2kW AC servo motor?
5
Shakey
Avatar
3/8/2021 6:52 PM
How do we control the speed and axis position of your 1.2kW AC servo motor?
Was this review helpful? Yes No (0/0)
ATO Responded
The 1.2kW AC servo motor controller is required to change the speed according to the 0-10 volt DC analog input, and the encoder will feedback its position to the controller.
1.2kW AC servo motor meets the requirements
5
Olafsson
Avatar
8/25/2021 1:22 AM
For your 1.2kW AC servomotor, do it meet the following requirements:
1. The servo drive includes inter-connecting power and feedback cables.
2. Servo drive needs to have a USB/Serial/CAN interface to control the servo motor using Laptop.
3. software to execute the application.
Was this review helpful? Yes No (0/0)
ATO Responded
1. Yes, the motor matching servo drive includes inter-connecting power and feedback cables 3 meters or 5 meters in length.
2. Yes, servo drive comes with standard RS485, you can choose to use CAN or Ethercat communication interface as an option. And if you want to communicate directly with a computer, then we recommend the Ethercat interface.
3. Yes, the service driver comes with free software to execute the application and monitor motor parameters.
Does your 1.2kW servo motor meet the following requirements?
5
Kristenye
Avatar
10/18/2021 12:06 AM
For your 1.2kW AC servomotor, do it meet the following requirements:
1. The servo drive includes inter-connecting power and feedback cables.
2. Servo drive needs to have a USB/Serial/CAN interface to control the servo motor using a laptop.
3. Software to execute the application.
Was this review helpful? Yes No (0/0)
ATO Responded
1. Yes, the motor matching servo drive includes inter-connecting power and feedback cables 3 meters or 5 meters in length.
2. Yes, servo drive comes with standard RS485, you can choose to use CAN or Ethercat communication interface as an option. And if you want to communicate directly with a computer, then we recommend the Ethercat interface.
3. Yes, the servo driver comes with free software to execute the application and monitor motor parameters.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

1200W AC servo motor brushless design, rated torque of 4 Nm, maximum output torque of 12 Nm, 3000 rpm, three phase 220V AC supply voltage, equipped with a 2,500 PPR incremental/ absolute encoder.

Specification

BasicsModelATO110ST-M04030
Matched Drive ModelATOMG-1000 (Click it to the product page)
Square Flange Size110 mm
Rated Power1200 W
Rated Voltagethree phase 220V AC
Rated Current5 A
Rated Speed3000 rpm
Rated Torque4 Nm
Peak Torque12 Nm
Weight6 Kg
Length189 mm
Technical ParametersVoltage Constant54 V/ 1000r/ min
Torque Coefficient0.8 N.m/ A
Torque Inertia0.54 x 10-3 Kg.M2
Line-Line Resistance1.09 Ω
Line-Line Inductance3.3 mH
Electrical Time-Constant3 ms
Encoder Line Number2500 PPR
Absolute Encoder17 bit, 23 bit (Tamagawa brand)
Insulation ClassClass B
Safety ClassIP65
EnvironmentTemperature-20℃ ~ +40℃
Humidity<90%RH, (no dewing)

Dimension (unit: mm)

110mm ac servo motor size

L (without brake): 189mm, L (with brake): 245mm

Details

1200W AC Servo Motor Details

Winding and Encoder Connection

1. For servo motor winding

Motor Winding PlugWinding LeadUVWPE
Socket Number2341

2. For incremental encoder

Incremental Encoder Socket (15 Pin)Signal Definition5V0VBZ-UZU-AVWV-A-B-W-PE
Socket Number234567891011121314151

3. For absolute encoder

Absolute Encoder Socket (7 Pin)Signal DefinitionE-E+SD-0VSD+5VPE
Socket Number2345671
Product reviews
How to control 1.2kW AC servo motor?
5
Shakey
Avatar
3/8/2021 6:52 PM
How do we control the speed and axis position of your 1.2kW AC servo motor?
Was this review helpful? Yes No (0/0)
ATO Responded
The 1.2kW AC servo motor controller is required to change the speed according to the 0-10 volt DC analog input, and the encoder will feedback its position to the controller.
1.2kW AC servo motor meets the requirements
5
Olafsson
Avatar
8/25/2021 1:22 AM
For your 1.2kW AC servomotor, do it meet the following requirements:
1. The servo drive includes inter-connecting power and feedback cables.
2. Servo drive needs to have a USB/Serial/CAN interface to control the servo motor using Laptop.
3. software to execute the application.
Was this review helpful? Yes No (0/0)
ATO Responded
1. Yes, the motor matching servo drive includes inter-connecting power and feedback cables 3 meters or 5 meters in length.
2. Yes, servo drive comes with standard RS485, you can choose to use CAN or Ethercat communication interface as an option. And if you want to communicate directly with a computer, then we recommend the Ethercat interface.
3. Yes, the service driver comes with free software to execute the application and monitor motor parameters.
Does your 1.2kW servo motor meet the following requirements?
5
Kristenye
Avatar
10/18/2021 12:06 AM
For your 1.2kW AC servomotor, do it meet the following requirements:
1. The servo drive includes inter-connecting power and feedback cables.
2. Servo drive needs to have a USB/Serial/CAN interface to control the servo motor using a laptop.
3. Software to execute the application.
Was this review helpful? Yes No (0/0)
ATO Responded
1. Yes, the motor matching servo drive includes inter-connecting power and feedback cables 3 meters or 5 meters in length.
2. Yes, servo drive comes with standard RS485, you can choose to use CAN or Ethercat communication interface as an option. And if you want to communicate directly with a computer, then we recommend the Ethercat interface.
3. Yes, the servo driver comes with free software to execute the application and monitor motor parameters.
Only registered users can write reviews
Customers who bought this item also bought

1.3 kW AC Servo Motor, 5 Nm/15 Nm, 2500 rpm

ATO-SERVO-110S1300AC
$688.23
High precision 1.3 kW brushless servo motor, single or three phase 220V AC input, rated speed of 2500 rpm, rated torque of 5 Nm, 5 amps, maximum output torque up to 15 Nm. 130mm square flange size, with brakes and encoder options.

1 kW 1000 rpm Brushless AC Servo Motor

ATO-SERVO-130S1000AC
$654.62
1 kW heavy duty AC servo motor with 1000 rpm low speed, 10 Nm rated torque, peak torque up to 25 Nm, 3 phase 220V supply voltage, equipped with a 2,500 PPR incremental encoder. Factory price electric servo motor is 130mm square flange size, with a brake option.