1/2" Thermodynamic Steam Trap

$143.84
1/2" (DN15) steam trap for sale online. Low price flanged thermodynamic steam trap with strainer and trap, suitable for steam system applications including process heating, steam tracing, and heating of tanks and vessels.
SKU: ATO-TST-15
Free Shipping
Delivery date: 6-12 days

Note: This steam trap cannot be used for drinking water.

Hot selling 1/2 inch (DN15) steam trap is a thermodynamic steam trap, flanged, sensitive and reliable operation, high capacity, used to remove condensate and other non-condensable gases from the system while minimizing steam loss.

Specifications

  • Model: ATO-TD42F-16C-DN15
  • Nominal Diameter: DN15 (1/2 inch)
  • Connection Method: Flange
  • Nominal Pressure: 1.6Mpa
  • Max Work Temperature: 350℃
  • Weight: 2.28kg
  • Material: WCB

Features

  • It has a steam or air thermal insulation device, which will not be affected by environmental humidity.
  • Thermodynamic type steam trap is equipped with a filter and drain valve.
  • It reduces the frequency of motion and lengthens the lifetime.
  • A thermodynamic steam trap is sensitive and reliable in operation with a large capacity.

Dimension(Unit: mm)

Thermodynamic steam trap dimension

No.Part NameMaterial
5Valve Cover2Cr13
4Valve PlateSUS 440
3Valve BodyWCB
2Filter304
1Screw Plug35
DNLH1H2ABCbfN~φ
1515040549565451624~φ14


Applications

The thermodynamic steam trap is widely used in steam systems, particularly in applications where there is a high rate of condensate formation or where there is a need for rapid condensate removal. They are commonly used in processes such as steam heating, sterilization, and cooking, as well as in industrial processes such as chemical manufacturing and oil refining.

Steam trap applications

Tips: What is a thermodynamic steam trap?

A thermodynamic steam trap is a type of steam trap used to remove condensate from steam systems. It operates based on the principle of thermodynamics, which is the study of the relationship between heat, energy, and work.

Thermodynamic steam traps have a disc or valve that is placed in a chamber. When steam enters the chamber, it flows around the disc or valve, causing it to lift and allowing the condensate to be discharged. As the steam flow decreases, the disc or valve drops back into place, preventing the escape of steam and allowing the trap to maintain its efficiency.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Excellent quality and reliable
5
Bobby
Avatar
10/9/2025 1:28 AM
Perfect for our steam tracing lines. Handles condensate removal efficiently with minimal steam loss. The built-in strainer is a nice plus. Flanged connection made installation straightforward. A reliable workhorse for industrial steam applications.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Note: This steam trap cannot be used for drinking water.

Hot selling 1/2 inch (DN15) steam trap is a thermodynamic steam trap, flanged, sensitive and reliable operation, high capacity, used to remove condensate and other non-condensable gases from the system while minimizing steam loss.

Specifications

  • Model: ATO-TD42F-16C-DN15
  • Nominal Diameter: DN15 (1/2 inch)
  • Connection Method: Flange
  • Nominal Pressure: 1.6Mpa
  • Max Work Temperature: 350℃
  • Weight: 2.28kg
  • Material: WCB

Features

  • It has a steam or air thermal insulation device, which will not be affected by environmental humidity.
  • Thermodynamic type steam trap is equipped with a filter and drain valve.
  • It reduces the frequency of motion and lengthens the lifetime.
  • A thermodynamic steam trap is sensitive and reliable in operation with a large capacity.

Dimension(Unit: mm)

Thermodynamic steam trap dimension

No.Part NameMaterial
5Valve Cover2Cr13
4Valve PlateSUS 440
3Valve BodyWCB
2Filter304
1Screw Plug35
DNLH1H2ABCbfN~φ
1515040549565451624~φ14


Applications

The thermodynamic steam trap is widely used in steam systems, particularly in applications where there is a high rate of condensate formation or where there is a need for rapid condensate removal. They are commonly used in processes such as steam heating, sterilization, and cooking, as well as in industrial processes such as chemical manufacturing and oil refining.

Steam trap applications

Tips: What is a thermodynamic steam trap?

A thermodynamic steam trap is a type of steam trap used to remove condensate from steam systems. It operates based on the principle of thermodynamics, which is the study of the relationship between heat, energy, and work.

Thermodynamic steam traps have a disc or valve that is placed in a chamber. When steam enters the chamber, it flows around the disc or valve, causing it to lift and allowing the condensate to be discharged. As the steam flow decreases, the disc or valve drops back into place, preventing the escape of steam and allowing the trap to maintain its efficiency.

Product reviews
Excellent quality and reliable
5
Bobby
Avatar
10/9/2025 1:28 AM
Perfect for our steam tracing lines. Handles condensate removal efficiently with minimal steam loss. The built-in strainer is a nice plus. Flanged connection made installation straightforward. A reliable workhorse for industrial steam applications.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews