1-1/4" DN32 Pneumatic Diaphragm Globe Shut-off Valve

$1,512.99
1 1/4" (DN32) pneumatic diaphragm globe shut-off valve is equipped with an 8mm rated stroke and a film effective area of 100 cm2, constructed from high-quality 304 stainless steel. The allowable pressure difference is specified for both positive action (1.85 MPa) and opposite reaction (2.47 MPa). The flangeless connection method simplifies installation and maintenance.
SKU: ATO-PGV-DN32
*
Free Shipping
Delivery date: 6-12 days

Note: This globe valve cannot be used for drinking water.

With a nominal pressure rating of PN16 MPa, rated flow coefficient of 20 Kv indicates its efficiency in regulating flow rates. In terms of pressure differentials, the valve can handle positive action up to 1.85 MPa and opposite reaction up to 2.47 MPa.

Feature

  • By using a thin-film multi-spring actuator connected to the adjusting mechanism by three columns, the overall height can be reduced by about 30 per cent and the weight by about 30 per cent. The overall height can be reduced by about 30 per cent and the weight by about 30 per cent.
  • The shut-off valve body is designed according to the principle of fluid dynamics into an equal cross-section low flow resistance flow path, the rated flow coefficient increases by 30%.
  • Compact structure, light weight, sensitive action, fluid channel is S streamline, small pressure drop loss, large capacity, easy disassembly and installation.
  • Top-guided construction with multi-spring membrane actuator.

Specification

ModelATO-810D-1S2A-4DK41-DN32
Pipe Diameter1-1/4" DN32
Nominal PressurePN16 MPa
Rated Flow Coefficient20KV
Rated Stroke8 mm
Film Effective Area100 cm²
Allowable Pressure DifferencePositive Action: 1.85
Opposite Reaction: 2.47
Signal Pressure0 or 250
Allowable LeakageHard Seal: General: 10-4 × valve rated capacity; Tight type: single-seat: 1.2 × 10-7
Soft Seal: Class VI
Operating Temperature≤ 250℃
Connection MethodFlangeless
Medium of UseGas and Liquid
Valve Body Material304
Bonnet TypeStandard type (-17 ~ +250℃)
Cover TypeScrew compression type
Sealing MaterialV-shaped PTFE packing, reinforced PTFE packing, graphite braided packing, flexible graphite
Valve Core TypeSingle-seat spool
Flow CharacteristicsQuick opening characteristic
Included AccessoriesPneumatic diaphragm actuator, DC24V solenoid valve, limit switch, and air filter regulator.


Dimension (Unit: mm)

3/4 inch diaphragm control valve size

DNALHH1H4
2029020075180310


Application

Pneumatic globe valve application

Tips: What maintenance procedures are recommended for this valve?

  • Regular Inspection: Conduct routine visual inspections to check for any signs of wear, corrosion, or damage to the valve body, actuator, and other components. Regular inspections help identify potential issues early on.
  • Lubrication: Apply lubrication to moving parts, especially those involved in the actuation mechanism, to reduce friction and ensure smooth operation. Use a suitable lubricant recommended by the manufacturer.
  • Check Seals and Gaskets: Inspect all seals and gaskets for signs of wear, deterioration, or leaks. Replace any damaged or worn seals to maintain the integrity of the valve's sealing system.
  • Verify Valve Position Indicators: Ensure that the valve position indicators, whether visual or electronic, are functioning correctly. This is crucial for operators to have accurate information about the valve's status.
  • Inspect Pneumatic System: Check the pneumatic system for leaks, pressure irregularities, or any issues that may affect the actuation of the valve. Address any pneumatic system problems promptly to maintain reliable valve control.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Note: This globe valve cannot be used for drinking water.

With a nominal pressure rating of PN16 MPa, rated flow coefficient of 20 Kv indicates its efficiency in regulating flow rates. In terms of pressure differentials, the valve can handle positive action up to 1.85 MPa and opposite reaction up to 2.47 MPa.

Feature

  • By using a thin-film multi-spring actuator connected to the adjusting mechanism by three columns, the overall height can be reduced by about 30 per cent and the weight by about 30 per cent. The overall height can be reduced by about 30 per cent and the weight by about 30 per cent.
  • The shut-off valve body is designed according to the principle of fluid dynamics into an equal cross-section low flow resistance flow path, the rated flow coefficient increases by 30%.
  • Compact structure, light weight, sensitive action, fluid channel is S streamline, small pressure drop loss, large capacity, easy disassembly and installation.
  • Top-guided construction with multi-spring membrane actuator.

Specification

ModelATO-810D-1S2A-4DK41-DN32
Pipe Diameter1-1/4" DN32
Nominal PressurePN16 MPa
Rated Flow Coefficient20KV
Rated Stroke8 mm
Film Effective Area100 cm²
Allowable Pressure DifferencePositive Action: 1.85
Opposite Reaction: 2.47
Signal Pressure0 or 250
Allowable LeakageHard Seal: General: 10-4 × valve rated capacity; Tight type: single-seat: 1.2 × 10-7
Soft Seal: Class VI
Operating Temperature≤ 250℃
Connection MethodFlangeless
Medium of UseGas and Liquid
Valve Body Material304
Bonnet TypeStandard type (-17 ~ +250℃)
Cover TypeScrew compression type
Sealing MaterialV-shaped PTFE packing, reinforced PTFE packing, graphite braided packing, flexible graphite
Valve Core TypeSingle-seat spool
Flow CharacteristicsQuick opening characteristic
Included AccessoriesPneumatic diaphragm actuator, DC24V solenoid valve, limit switch, and air filter regulator.


Dimension (Unit: mm)

3/4 inch diaphragm control valve size

DNALHH1H4
2029020075180310


Application

Pneumatic globe valve application

Tips: What maintenance procedures are recommended for this valve?

  • Regular Inspection: Conduct routine visual inspections to check for any signs of wear, corrosion, or damage to the valve body, actuator, and other components. Regular inspections help identify potential issues early on.
  • Lubrication: Apply lubrication to moving parts, especially those involved in the actuation mechanism, to reduce friction and ensure smooth operation. Use a suitable lubricant recommended by the manufacturer.
  • Check Seals and Gaskets: Inspect all seals and gaskets for signs of wear, deterioration, or leaks. Replace any damaged or worn seals to maintain the integrity of the valve's sealing system.
  • Verify Valve Position Indicators: Ensure that the valve position indicators, whether visual or electronic, are functioning correctly. This is crucial for operators to have accurate information about the valve's status.
  • Inspect Pneumatic System: Check the pneumatic system for leaks, pressure irregularities, or any issues that may affect the actuation of the valve. Address any pneumatic system problems promptly to maintain reliable valve control.
Only registered users can write reviews