ATO manual angle seat valves are indispensable components for achieving precise and dependable fluid control in industrial processes, reflecting a commitment to quality, durability, and operational excellence.
Specification
- Model: ATO-MANGLE-DN32
- Thread Port Size: 1-1/4 inch (DN32)
- Working Medium: Air, Water, Oil, Gas, Steam
- Body Material: 304 Stainless Steel
- Driving Mode: Manual
- Nominal Pressure: 1.6Mpa
- Connection type: Internal thread
Manual Angle Seat Valve Dimension

- G: 1-1/4 inch (DN32)
- L: 120mm
Tips: How to use a manual angle seat valve?
- Inspect the Angle Seat Valve: Examine the valve for any visible damage or debris. Ensure it is in the closed position if not already.
- Prepare the Piping: Make sure the piping system connected to the valve is properly set up and ready for operation.
- Turn the Handle: Rotate the valve's handwheel or lever in the desired direction to open or close the valve. Typically, turning it counterclockwise opens the valve, while turning it clockwise closes it.
- Monitor Flow: While turning the handle, observe the flow of the fluid through the valve. The valve's position can be adjusted to control the flow rate.
- Close the Valve: To stop the flow, turn the handle in the opposite direction until the valve is fully closed.
- Regular Maintenance: Periodically inspect and lubricate the valve to ensure smooth operation and prevent any issues.
Only registered users can write reviews