ATO 0.5-10mm measuring range feeler gauge is made of high-quality steel, and the gap gauge with laser engraving makes the reading more accurate.
Specification
- Model: ATO-FG-K10D
- Measuring Range: 0.5-10mm
- Division value: 0.05mm
- Material: 304 stainless steel
- Weight: 500g
Dimension (Unit: mm)
L: 233mm a: 9.6mm b: 10.5mm

Application

Tips: How to use a feeler gauge?
- Wipe the measuring surface of the feeler gauge with a clean cloth, and do not measure when the feeler gauge is stained with oil or metal shavings, otherwise, the accuracy of the measurement result will be affected.
- Insert the feeler gauge into the measured gap, pull the feeler gauge back and forth, and feel a little resistance, indicating that the gap value is close to the value marked on the feeler gauge; if the resistance is too large or too small when pulling, it means the gap The value is less than or greater than the value marked on the feeler gauge.
- When measuring and adjusting the gap, first select a feeler gauge that meets the gap regulations and insert it into the gap to be measured, then adjust and pull the feeler gauge until you feel a little resistance and tighten the lock nut. The marked value is the measured gap value.
Product reviews
Portable feeler gauge
Orion
11/6/2024 11:25 PM
This feeler gauge features a foldable design, where all the gauge pieces can be neatly stored together and easily unfolded during use. Even if placed in a toolbox or backpack, it won't take up too much space and is very convenient to carry.
Was this review helpful? (0/0)
Only registered users can write reviews