2 Wire ceiling fan capacitor capacity value 0.5mfd, tolerance ±5%, rated voltage 450V AC, maximum allowable voltage does not exceed 1.1 times the rated voltage, maximum allowable current does not exceed 1.3 times the rated current.
Specification
- Model: ATO-FC-CBB61-005
- Capacity: 0.5μF
- Rated Voltage: 450V
- Tolerance: ±5%
- Withstand Voltage: 2. 0 Un (2s)
- Loss: (DF)≤0.0010 100Hz
- Insulation Resistance: CxRs≥3000S (23℃, 1000VDC, 1min)
- Rated Frequency: 50/60Hz
- Climate Category: 40/105/21
- Scope of Application: Start, run
- Appearance: Rectangular
- Lead Out Method: Cord, pin, insert
- Dielectric Material: Organic thin film
- Dimension: 32(W) x 10(L) x 18(H)mm
- Certificate: CE, CQC
0.5μF Fan Capacitor 2 Wire Circuit Diagram

Ceiling Fan Capacitor Details

Tips: Do fan capacitors have polarity?
The capacitors are not positive or negative, the terminals are connected to the external metal layer, and the motor capacitor must be non-polarized. ATO-CBB61 fan capacitors are widely used in ceiling fans, wall fans, standing fans, industrial fans, range hood fans, ventilating fans, pumps, motors, generators, etc.
Product reviews
I finally replaced the old capacitor
Wyatt
6/28/2022 2:15 AM
I'm glad I purchased the ceiling fan capacitor, I'll buy it again! Just like the original. Cut the wire near the cap and it was easy to replace using the small gray nut I had on hand.
Was this review helpful? (0/0)
Works great
Mike
5/26/2026 6:56 PM
Exact match for my fan. This 0.5μF 450V capacitor works flawlessly, easy to install and holds up well during daily use. Very satisfied.
Was this review helpful? (0/0)
Only registered users can write reviews